FLSUN QQ-S 90% Pre-assembled Delta 3d Printer Printing Size Φ255X360mm Lattice glass platform Auto Leveling Touch Screen

Product Information

During the heating phase, the print bed heats up with a maximum of 250 watts, and the hotend then reaches 40 to 50 watts. Our commitment extends beyond just providing exceptional products; we are equally dedicated to delivering a seamless support experience. However, the practical test with the original MKS firmware reveals considerable weaknesses here at higher printing speeds.

This manifests itself in jerks and later also in large holes in the walls, since the filament flow is not stable when the firmware repeatedly stops the movements of all motors briefly. Marlin and MKS firmware also appear to be preconfigured with different values for acceleration and jerk. The heavy stepper motor of the Bowden extruder is also located on top of the device and therefore does not have to be moved when printing. From March 28th to May 9th, the pre-sale of SR printer has officially ended, thanks to the support of 3D printing users to FLSUN and SR printer.Workhorse: no print failed, and any messier prints were because we should have better optimized the support settings. While the layers and extrusions are created more accurately by Marlin, ghosting also increases here. During the printing process, it becomes clear that less energy is needed to maintain the temperatures with increasing object height, since the fans remove less heat from the print bed for cooling. In addition, there is an ESP8266 module for a WLAN connection, via which GCodes can be transmitted to the printer via Cura plugin. I enjoy building all sorts of gadgets with Arduino and 3D printers, and I still like to put electronic devices through their paces.

Came promptly and very well packed, assembled easily, slightly fiddly to put in vertical covers but only took a little effort to understand.

There is a huge demand of high-tech glass bed because it releases prints in the coolest manner one can ever imagine to take off the part or functional prototype from the print bed. The Voltcraft SL-10 sound level meter still shows a maximum volume of around 60 dBA even at a distance of one meter (~3. Here, there is a simple solution with tape or a somewhat more elegant solution with a few printed parts. QQ-S PRO is equipped with a 32-Bit motherboard and a separate MOS module, allowing for stable prints even at high printing speed. It is obvious that the printer, due to its design, is quite high at 101cm including the filament spool, but with a triangular base of 46cm edge length it occupies not much space on your workbench.