Reolink 4K IP PoE Camera Outdoor CCTV with Smart Human/Vehicle Detection, IR Night Vision, IP66 Weatherproof Security Camera Supports Audio Recording, microSD Card Slot, Time Lapse, RLC-810A

Product Information

The quality of the video for both cameras has been excellent for my needs and based on the price of the cameras. Even though the Reolink RLC-810A is an 8-megapixel camera, it does not have spotlights and this may be a deal breaker for you. Let’s not get into the intricacies of the hardware, but we can see a posteriori how the FP2024 5F1GQ4UBYIG memory produced by GigaDevice is used.

Or if you want to make Reolink NVR work with the camera, its connection diagram will be like below: Loader partition ― component in charge of loading the operating system, memory area 0x0 of size 0x40000. I like that you have the ability to toggle on or off the recording functions as well as the IR lights etc. As someone on facebook mentioned to me, they’re into Astrophotography (as am I) so to be able to turn off the IR lights was key. I also like that the motion trigger is accessible. It means that I can access that in Home-Assistant or Node-red and use that sensor to trigger other things.Our investigation of the CPU unfortunately ends here, as we have no further information from Novatek. A document showing the datasheet of the NT96650BG board can give you an idea as to the degree of secrecy Novatek assumes with respect to their information. NAND memory Reolink Windows App – Camera Setup Reolink Windows App – Camera Network Settings Reolink Windows App – Camera Settings

Picture: Clear picture, the 4k can read the lettering on my "Weber" grill cover pretty easily. I won't say it's a huge improvement over my 5mp RLC-510, but it's better.It does have a built-in microphone so it can record audio, and the camera is IP66 rated which means it’s weatherproof and shouldn’t have any problems with heavy rain. It has a working temperature between -10 and 55 degrees celsius. This type of memory is a very large category of storage media (solid-state disk) that stores data through a configuration of transistors. These transistors (which may represent NOR or NAND ports, depending on the case) retain an electrical charge for a long time. Each transistor constitutes a memory cell that stores the value of a bit ― having several memory cells in series or in parallel makes it possible to store tons of data. During the course of this article, we will also proceed as hardware manufacturers and, with a critical eye, comment on each choice made by the manufacturer. Extracting Image with dd rootfs partition ( rootfs.ubifs.bin file) ― contains the file system image with configuration files and the operating system, size 0x2000000 starting at 0x700000.

In motion detection, we can set the sensitivity and even set a schedule if we want different sensitivity at different times. We can also select in what area we want motion detection active. Overall, these are superb little cameras with decent image quality for the price and flexible recording options.Blue Iris Settings (you can set up different none admin users within the camera) You can change the ports if needed The major distinguishing factors that the Reolink RLC-811A has over the Reolink RLC-810A are that it is built with spotlights and has 5x zooming capability. The Reolink RLC-810A does not have spotlights or zoom. Why should you not consider the Reolink RLC-811A? In-camera recording, we can turn on or off recording, set a schedule if you want to continue recording and we can also set how long it should prerecord when motion is detected. 15 sec, 30 sec, and 1 min.

What interests me most about this camera is person & vehicle detection, because I get so many useless “motion detected” alerts with my other cameras, I have stopped to care. The object detection works well, I would say it is maybe not quite as accurate as Eufy or Sentry AI (with Blue Iris), but it is close.You can configure both camera models to sound their alarm when motion is detected. But on the Reolink RLC-811A, you have the added advantage of the spotlights. These come ON automatically at night and can be used to scare away potential intruders before they make moves to break in. Before continuing with the more serious analysis using Binwalk, it is useful to explain the flattened device tree file format, which allows the operating system to know in advance the hardware devices that are present within the embedded system.